PTMC Series (Multi-media filter + Carbon filter) Pretreatment for R.O. have been engineered for capacities ranging from 10 m3/h to 50 m3/h
SWRO-4040 Series Sea Water System have been engineered for capacities ranging from 300LPH to 1000LPH for Sea water desalination design.Features:Auto start-up flushStart-up pressure build up slowlyAuto Shut-down flesh water high flow flush Auto Shut-down flesh water replacement pumps and valves switching smoothlySS304 Skid with coatingSS304 control panel with coating Auto and manual 2 modes operationWith pulsation dempenerDiaphragm isolation seals for pressure switchesDisaphragm isolation seals for high pressure gaugesPermeate and concentrate water low flow protection (if don't need, just don't connect)Benefits:Fully Equipped and CustomizableIndividually Tested and preservedExpandable and Skid MountedLow Operation and Maintenance CostsComponents Easily AccessibleEasy Maintenance and ServicingPre-Plumbed Wired and Assembled1-Year Limited Warranty
PTUF series system have been engineered for permeate capacities ranging from 2.5 to 100m³/h.
Electrodeionization (EDI) is an electrically-driven water treatment technology that uses electricity, ion exchange and resin to remove ionized species from water. The combination of ion-exchange resins and ion-exchange membranes, which are used to move ionic impurities into a waste or concentrate water stream leaving purified product water. An EDI-unit is usually used as a post treatment of Reverse Osmosis water.Features:No salt InjectionCounter currentLow energy consumptionPLX-100PLX-200PLX-300PLX-450Product Flow1235Flow Range0.1-1.51.5-2.52.5-3.54.5-5.5Product Resistivity≧15≧15≧15≧15Operating Current≦7≦7≦7≦7Operating Voltage≦200≦300≦400≦600Feed Pressure0.2-0.50.2-0.50.2-0.50.2-0.5Recovery90909090
PTROL Series Reverse Osmosis Systems have been engineered for capacities ranging from 16m3/h to 108m3/h (Feed TDS < 2500 ppm)
PTROM Series Reverse Osmosis Systems have been engineered for capacities ranging from 4m3/h to 10m3/h (Feed TDS < 2500 ppm)